产品
3
产品中心

3-ton spider crane – red

Vehicle Dimensions Cat-eye height from ground: 1,602 mm; overall vehicle length: 3,800 mm (excluding the lower operating lever); 3,410 mm when the boom is fully extended; width from the cat-eye to the center of the boom head wheel: 920 mm (measured from the outer edge of the outrigger gear to the outer edge). 3-ton spider crane – Product detailed parameters Outrigger Spacing Outrigger spacing—front approximately 450 mm + rear approximately level (with both sections fully extended) Front-to-rear spacing: 3,300 mm Front-to-side spacing: 5,000 mm Rear-to-side spacing: 5,900 mm Frame height: 850 mm Overall vehicle height: 2.00 m (from the footplate to the ground); without the third section: 1.88 m Boom in horizontal position: highest point of the boom above ground: 1,940 mm Vehicle Weight Total vehicle weight: 3,395 kg (verified by a 260307 scale) Working Radius Fully extended boom height: 12.3 m (measured with a new meter stick from the small hook to the ground) (Compared to the previous spider crane model, the cat-eye has been moved forward by 50 cm) Side working radius at one-ton load: 8.6 m (outrigger spacing—front approximately 450 mm + rear approximately level) Front working radius at one-ton load: 6.5 m (outrigger spacing—front approximately 450 mm + rear approximately level)

< 1 > proceed page